
Outboard Motor Seal Components Gasket
The 4 stroke 3.5hp outboard motor is a detachable power device that is usually hung on the assault boat and the stern of the boat, and is used as a detachable power device to propel the boat and the boat to sail.
Product Introduction
[[MetaDescription]]
The 4 stroke 3.5hp outboard motor is a detachable power device that is usually hung on the assault boat and the stern of the boat, and is used as a detachable power device to propel the boat and the boat to sail. Also known as outboard motor and hook motor. It is composed of engine and transmission, control, suspension and propeller. Our outboard engine is 4-stroke 3.5 horsepower, with compact structure, light weight, convenient loading and unloading, simple operation, low noise and so on. It weighs only 17 kg and can be carried with one hand. The starting method is manual, which is suitable for emergency fire fighting in inland rivers and offshore waters. It is commonly used on boats, boats, and gate bridges that perform landing, river crossing, patrol, and lifesaving tasks. The 4 stroke 3.5 hp outboard motor can also be used on civil wooden boats, plastic boats, racing boats, yachts, short-distance transport boats and fishing boats. When cruising in shallow water, the outboard motor can be partly tilted upwards to facilitate navigation in shallow water and run at the lowest possible speed when using the shallow water navigation system. Once the ship returns to the deep water area, the engine must be returned to its normal position. This outboard engine uses TCI ignition system. TCI is the abbreviation for transistor-controlled ignition. The ignition performance is reliable. Due to the inductive energy storage method, the secondary energy of the ignition system is large and the secondary voltage is high, which can meet the requirements of high-performance engines. need. This outboard motor is suitable for inflatable boats with a height of 42cm on the stern, and it is a short axle type. Our speed range is between 5250-5750, which can meet the needs of high-speed boats.
It should be noted that do not start the machine on the shore.
PNF3.5 | ||
moto type | 1 Cylinder | |
displacement | 72cc | |
bore*stroke | mm | 54*31.5 |
compression ratio | 9 | |
full throttle speed range | 2.5HP@5500rpm | |
max.rpm range | 5250-5750 | |
fuel/induction system | OHV | |
intake | Carburetor | |
exhaust | Above Proppeler | |
ignition system | TCI | |
starter | Manual | |
engine oil capacity | 350cc | |
gear ratio | 2.08 | |
shaft length | S=15" | |
dry weight | KG | 17 |
steering angle(maximum) | 90from center,either direction |
[[ContDescription]]
Hot Tags: 4 stroke 3.5hp outboard motor, China, suppliers, manufacturers, factory, made in China, Inflatable Dinghy with Motor, Inflatable Fishing Boat, 2 Stroke 30 Hp Outboard Motor, 0 9mm PVC Inflatable Boat, 3 5M Inflatable Fishing Boat, 2 7m PVC Material Inflatable Boat
Send Inquiry
You Might Also Like
[[ShowRoomListRandom]]